Tienda
Filtrar por Marca
AP7 HAND HELD PROGRAMMER
Código de producto:0700-03500
The AP7 is designed for use with all analog sensors
and modules.
Standard Features
Compact unit
Easy to use
Provides address setting and reading
Can be used on both sensors and modules
Has the diagnostic ability to display the analog values
Over 8000 address settings from one battery
ARMPak 8200 Packaged Pumping Systems
- ApplicationsHeating and cooling, plumbing and waste water, especially in tight spaces in mechanical rooms where parallel pumping is needed with or without optional standby pump
- DescriptionThe Armstrong 8200 ARMPak pumping packages are specifically designed to meet the requirements of chilled water and heating water systems in commercial buildings. They are available in duplex and triplex configurations, with fixed or variable speed control. Suitable for space constrained installation, parallel pumping and optional stand-by pump
- Configuration4280V or 4200V pumps, Flo-Trex valves, optional IPS controls and variable frequency drive(s) with bypasses, NEMA 1 control panel (including gauges and interconnecting piping), headers, valves, and fittings
- Size3”, 4” and 6” header sizes
Compass H
- ApplicationsResidential heating and cooling; potable water supply
- DescriptionThe Armstrong Compass H is an energy-efficient variable speed wet-rotor circulator. Designed to replace existing fixed speed circulators, with popular flange-to-flange dimensions, Compass H can be considered a universal replacement for all circulators in its capacity range.
- MaterialsCast iron and stainless steel volutes.
- ConfigurationEight operation modes with patented “Auto” algorithm, four Sensorless modes and three fixed speed modes. 50 Hz and 60 Hz designs
- Performance rangeUp to 20 USgpm (1.26 L/s) flow; up to 20 ft (6.1 m) head
- TemperatureMax ambient temp. 40°C; max water temp. 110°C
- Power Range5 W to 45 W
- Size1″
Compass R
- ApplicationsResidential heating and cooling; potable water supply
- DescriptionThe Armstrong Compass R is an energy-efficient variable speed dry-rotor circulator. Designed to replace existing fixed speed circulators, with popular flange-to-flange dimensions, Compass R can be considered a universal replacement for all circulators in its capacity range.
- MaterialsCast iron and stainless steel volutes.
- ConfigurationEight operation modes with “Auto” algorithm, four Sensorless modes and three fixed speed modes. 50 Hz and 60 Hz designs
- Performance range0 to 140 USgpm (8.8 L/s) flow; 0 to 40 ft (12.2 m) head
- TemperatureMax ambient temp. 40°C; max water temp. 110°C
- Power Range1/6 hp and 1/2 hp
- Size2 and 4 bolt
Design envelope chilled-water integrated plant package
- ApplicationsCommercial and industrial chilled-water cooling systems
- DescriptionThe Armstrong Chilled-Water Integrated Plant Package combines all the equipment needed to deliver chilled water to medium to large size buildings at superior energy efficiency. The factory-assembled plant includes pumps, integrated controls, water-cooled chillers and the requisite instrumentation, valves and sensors. IPP complies with all ASHRAE 189.1 requirements and exceeds ASHRAE 90.1.
- ConfigurationVariable primary with variable condenser flow. Catalogue-based pre-engineered solutions or designed to customer specification. BMS communications protocol available
DH-100-A ADDRESSABLE DUCT DETECTOR
STANDARD FEATURES
- Air Low Flow 100fpm Listed
- Detects and limits the spread of smoke throughout building HVAC ducts
- Compatible with building automation and fire alarm systems
- Installs quickly and easily
- No screens or filters to clean
- Rugged gray steel back box with clear cover
- Accessories – Remote LED alarm indication capability
- UL 268A Listed
EJMM3550T 1.5HP, 3500RPM, 3PH, 60HZ, TEFC, 143JM
AC Motor; Pump; 1-1/2HP; 143JM Frame Size; 3600 Sync RPM; 208-230/460 Voltage; AC; TEFC Enclosure; NEMA Frame Profile; Three Phase; 60 Hertz; C-Face | Foot Mounted; Base; 7/8″ Shaft Diameter; 3-1/2″ Base to Center of Shaft; 15.43″ Overall Length; 85.5% Efficiency Full Load
Enclosed Pump Packages
- ApplicationsFire-protection of buildings and other built infrastructure
- ConfigurationAvailable as single electric, single diesel, one electric plus one diesel, two electric, or two diesel configurations. Optional features include tamper switches, test header lines, city by-pass and flow meter loops with all required piping and valves.
- BenefitsArmstrong enclosed fire pump packages combine a fire pump system, piping, electrical and exhaust components, and a weather-proof enclosure. Pump packages are designed, built and tested in a controlled ISO 14000 certified factory environment and shipped to site ready for installation
End suction HVAC pumps
- ApplicationsEnd Suction pumps for HVAC system pumping and control; general purpose pumping; industrial or process pumping and control (water or glycol based)
- DescriptionEnd Suction, base mounted horizontal pumping unit with integrated intelligent controls for easier installation and superior energy performance. Saves up to 75% in energy over comparable traditional constant speed or variable frequency operated pump installations. Units up to 10hp (7.5kW) include integral vibration isolators.
- Materials
- Cast-iron or ductile iron casing / ductile iron e-coated casing on units 1-10hp
- Bronze impeller (stainless steel available on units up to 10hp)
- Sintered silicon carbide mechanical seal
- ConfigurationOn-board Intelligent Variable Speed controls with Sensorless control. Controls enclosure UL Type 12 (IP55) indoor applications. 1-10hp (0.75-7.5 kW) range standard with Design Envelope permanent magnet (DEPM) motors that reduce losses by more than 20% over NEMA Premium efficiency. Network capable for remote performance management services.
- Performance range25 to 4500 USgpm (1.5 to 283 L/s) flow; 10 to 400 ft (3 to 121 m) head (composite curves available)
- Temperature300oF (150oC)
250oF (121oC) – for units up to 10hp - Power Range1 hp to 125 hp (0.75 kW to 90 kW)
- Size1.25″ to 8″ discharge (32 mm to 200 mm)
Engineered to Order Packaged Systems
- ApplicationsPre-fabricated HVAC systems for a variety of applications including chiller plants, boiler plants, pumping stations, energy transfer stations, substations, cooling tower applications, fire pump systems, and water-based process applications.
- DescriptionArmstrong pre-fabricated HVAC Systems include a combination of: structural, process equipment, controls, electrical gear, and even environmental enclosures that are designed and fabricated to customer specifications. In addition, the program offers a full range of catalogued pre-engineered designs selectable from our on-line software – which includes 2D and 3D CAD files for immediate drag-and-drop into mechanical room designs.
Engineered to order (custom) HVAC Systems such as Fluid Management Systems, Heat Transfer Packages, and Packaged Plant Rooms can be ordered by contacting your local representative.
- Performance rangeSystem capabilities address process requirements up to header sizes of 36” (900 mm), and multiple fluid streams with parallel or serial configurations
- TemperatureSystems can be designed for indoor or outdoor applications in environments ranging from -40oF (-40oC) up to +120oF (52oC)
- Power RangeUnlimited
- SizeUnlimited